QCN9074 WiFi Card IPQ6010,IPQ6018 802.11ax
MT7915/MT7975/IPQ6000/IPQ6018/[IPQ6010])/IPQ4019/IPQ4029/ipq4018/IPQ4028/IPQ8072/IPQ8072A/IPQ8074/IPQ8074A/IQCN6024/QCN9074/QCN9072/QCN9024/IPQ5018/AR9223/QCA9880/QCA9882 /AR9582/AR9531/AR9344 /AX200NGW With over 15 years of experience in wireless industry and penetrating market olfaction, Wallys has designed and manufactured many high quality and cost-effective routerboards and wireless network cards.
In the complex market, Wallys products stand out and are affirmed by partners. From 802.11 a - ax, Wallys always keeps up with the most cutting-edge wireless technology, aimed to help customers take the preemptive opportunities to occupy the market and lead a win-win cooperation. BY:Wallys Communications (Suzhou ) Co., LTD EMAIL:sales3@wallystech.com
Features
Quad-core ARM 64bit A53@1.8GHz Processor 1GB DDRL3L System Memory 8MB NOR Flash, 256MB NAND Flash Supports Dynamic Frequency Selection (DFS) 2x2On-board 2.4GHz radio, up to 573Mbps physical Data Rate 2x2On-board 5GHz radio, up to 1201Mbps physical Data Rate Applications
802.11ax MU-MIMO OFDMA Access Point Mesh router supporting EasyMeshHotel Wireless application Smart AP TWT Product Description
dr6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2×2 5G high power Radio module and 2×2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Passive POE 24-48V supported, DC jack 24-48V. If you need 802.3af/bt active POE support , then please order 524wifi 6018-S HV version.
Compact “524wifi 6018-S” router board that runs Linux on a Qualcomm IPQ6010 with 802.11ax (Wi-Fi 6) and an M.2 slot plus dual GbE ports, including one with active or passive PoE, and optional micro-SD, GPS, and USB 3.0.
This board has followed up on its 5-port 524wifi 6018-S v3 router board with a smaller 524wifi 6018-S board with the same Qualcomm-Atheros IPQ6010 SoC with 802.11a/n/ac/ax (Wi-Fi 6), but with only 2x GbE ports. The 125 x 105 x 20mm 524wifi 6018-S features 802.3bt-compliant, active and passive, 24-48V Power-over-Ethernet on one of the ports. By comparison, the 524wifi 6018-S v3 offers a single passive PoE port along with 3x standard GbE and a 2.5GbE port.
The up to 1.8GHz, quad-core, Cortex-A53 IPQ6010, which has also appeared on 8devices’ Mango module and DVK, features built-in support for dual-band MU-MIMO, 2.4GHz/5GHz 802.11ax. Wi-Fi 6 is faster than 802.11ac (Wi-Fi 5) and supports concurrency for simultaneous WiFi connections to multiple devices. Wally’s does not list the OS, but has previously informed us its Qualcomm boards run Linux.
Although not listed in the specs, the detail view suggests you can optionally choose to remove the 2.4GHz radio and use only the 5GHz connection. In addition to the built-in 802.11ax, there is an M.2 E-key slot for adding a Qualcomm QCN9074 802.11ax module. Four x U.FL antenna connectors are included along with a Bluetooth 4.2 radio and optional GPS.
The 524wifi 6018-S ships with 256MB to 1GB DDR3L RAM via dual sockets plus 8MB NOR and 256MB NAND flash. A micro-SD and USB 3.0 port are optional. An FFC/FPC connector provides an LCD display output and there is a 12-pin serial interface.
In addition to the PoE port, a DC jack operates at the same 24-48V range. The board has a -40 to 70°C operating range with 5-95% non-condensing humidity resistance. The 524wifi 6018-S supports an EasyMeshHotel Wireless application.
Absolute Maximum Rating
Parameter Rating Unit
Supply Voltage 24V48V(DC Jack) V
Operating Temperature Range -40 to +70 ºC
Storage Temperature Range -45 to +105 ºC
Operating Humidity Range 5 to +95 (non-condensing) %
Hardware Specifications
Symbol Parameter
CPU Qualcomm-Atheros IPQ6010
CPU Frequency Quad-core ARM 64 bit A53 @1.8 GHz processor
System Memory 1GB (2x 512MB) DDR3L 16-bit interface with 32-bit memory bus design
Ethernet Port 1 x 1Gbps Ethernet Ports & POE 1x 1Gbps Ethernet Ports
NGFF Slot M.2 (NGFF) “E Key” Socket with MiniPCIe 3.0(For WiFi Module)
SD Card Slot 1x SD Card Slot(Option)
USB /header 1x USB 3.0 Port(Option)
POE LV Version : 24V48V passive POE / HV version: Active POE(Suport 802.3bt)
DC Jack 24V48V power supply
LED header FFC/FPC Connector
Serial Port 1x Serial Port 12 Pin Connector
Wireless On-board 2×2 2.4GHz MU-MIMO OFDMA 802.11b/g/n/ax, max 23dBm per chainOn-board 2×2 5GHz MU-MIMO OFDMA 802.11a/n/ac/ax, max 20dBm per chain4 x MMCX Connectors
Bluetooth CSR8811 BLE 4.2
Nor Flash 8MB
Nand Flash 256MB
DDR 256MB512MB