MongoDB的安装与使用

Wesley13
• 阅读 744

1- NoSQL简介

  • NoSQL(NoSQL = Not Only SQL ),意即"不仅仅是SQL";
  • NoSQL是指非关系型的数据库,有时也称作Not Only SQL的缩写,即"不仅仅是SQL",是对非传统关系型数据库管理系统的统称;
  • NoSQL用于超大规模数据的存储(数据存储不需要固定的模式,无需多余操作就可以横向扩展);

2- MongoDB简介

HomePage: https://www.mongodb.com/

  • MongoDB是一个由C++语言编写、介于关系和非关系之间、基于分布式文件存储的开源数据库系统;
  • MongoDB旨在为WEB应用提供可扩展的高性能数据存储解决方案,在高负载的情况下,可以添加更多的节点来保证服务器性能;
  • MongoDB将数据存储为一个文档(类似于 JSON 对象),数据结构由键值(key=>value)对组成,字段值可以包含其他文档,数组及文档数组;
  • 存储方式和Redis类似,但Redis是内存存储,而MongoDB是和普通数据库目录一样存储在硬盘;

MongoDB的一个显著的特点,所有的数据库和数据集合(数据表)都是在使用中创建,用户无需提前指定创建;

3- 安装与启动

3.1- 官网安装指南(推荐)

3.2- 安装示例(在CentOS7部署单节点MongoDB)

注意:

  • 与官网推荐安装方式有所不同,启动MongoDB的方式也有差异,例如需要每次声明环境变量等等。
  • 建议通过“官网安装指南”来完成MongoDB的安装及使用

3.2.1- 下载安装包

官网下载地址: https://www.mongodb.com/download-center#community

根据实际情况和需要选择下载安装参数,并下载

MongoDB的安装与使用

3.2.2- 安装并设置环境变量

[root@localhost ~]# ll
total 82988
-rw-------. 1 root root     2029 Nov 16 15:05 anaconda-ks.cfg
-rw-r--r--. 1 root root     2060 Nov 16 15:08 initial-setup-ks.cfg
-rwxrwxrwx. 1 root root 84970205 Nov 16 15:13 mongodb-linux-x86_64-rhel70-4.0.4.tgz
[root@localhost ~]# 
[root@localhost ~]# mkdir -p /usr/local/mongodb
[root@localhost ~]# chmod 755 /usr/local/mongodb
[root@localhost ~]# 
[root@localhost ~]# tar -zxvf mongodb-linux-x86_64-rhel70-4.0.4.tgz
mongodb-linux-x86_64-rhel70-4.0.4/README
mongodb-linux-x86_64-rhel70-4.0.4/THIRD-PARTY-NOTICES
mongodb-linux-x86_64-rhel70-4.0.4/MPL-2
mongodb-linux-x86_64-rhel70-4.0.4/LICENSE-Community.txt
mongodb-linux-x86_64-rhel70-4.0.4/bin/mongodump
mongodb-linux-x86_64-rhel70-4.0.4/bin/mongorestore
mongodb-linux-x86_64-rhel70-4.0.4/bin/mongoexport
mongodb-linux-x86_64-rhel70-4.0.4/bin/mongoimport
mongodb-linux-x86_64-rhel70-4.0.4/bin/mongostat
mongodb-linux-x86_64-rhel70-4.0.4/bin/mongotop
mongodb-linux-x86_64-rhel70-4.0.4/bin/bsondump
mongodb-linux-x86_64-rhel70-4.0.4/bin/mongofiles
mongodb-linux-x86_64-rhel70-4.0.4/bin/mongoreplay
mongodb-linux-x86_64-rhel70-4.0.4/bin/mongod
mongodb-linux-x86_64-rhel70-4.0.4/bin/mongos
mongodb-linux-x86_64-rhel70-4.0.4/bin/mongo
mongodb-linux-x86_64-rhel70-4.0.4/bin/install_compass
[root@localhost ~]# 
[root@localhost ~]# mv mongodb-linux-x86_64-rhel70-4.0.4/bin /usr/local/mongodb/
[root@localhost ~]# 
[root@localhost ~]# ll -R /usr/local/mongodb/
/usr/local/mongodb/:
total 0
drwxr-xr-x. 2 root root 231 Nov 19 15:47 bin

/usr/local/mongodb/bin:
total 253744
-rwxr-xr-x. 1 root root 12393712 Nov  7 03:48 bsondump
-rwxr-xr-x. 1 root root     5792 Nov  7 04:06 install_compass
-rwxr-xr-x. 1 root root 39753304 Nov  7 04:06 mongo
-rwxr-xr-x. 1 root root 62170704 Nov  7 04:06 mongod
-rwxr-xr-x. 1 root root 14702992 Nov  7 03:49 mongodump
-rwxr-xr-x. 1 root root 12733096 Nov  7 03:48 mongoexport
-rwxr-xr-x. 1 root root 12634648 Nov  7 03:48 mongofiles
-rwxr-xr-x. 1 root root 12892232 Nov  7 03:49 mongoimport
-rwxr-xr-x. 1 root root 15800824 Nov  7 03:49 mongoreplay
-rwxr-xr-x. 1 root root 15821528 Nov  7 03:49 mongorestore
-rwxr-xr-x. 1 root root 35363672 Nov  7 04:06 mongos
-rwxr-xr-x. 1 root root 12947464 Nov  7 03:48 mongostat
-rwxr-xr-x. 1 root root 12589240 Nov  7 03:49 mongotop
[root@localhost ~]# 
[root@localhost ~]# echo $PATH
/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin
[root@localhost ~]# 
[root@localhost ~]# export PATH=/usr/local/mongodb/bin:$PATH
[root@localhost ~]# 
[root@localhost ~]# echo $PATH
/usr/local/mongodb/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin
[root@localhost ~]#

注意:这里是把bin目录绝对路径临时添加到环境变量中,重启系统后,将恢复默认环境变量;

3.2.3- 创建数据库目录

[root@localhost ~]# mkdir -p /home/Anliven/data/db
[root@localhost ~]# chmod 755 /home/Anliven/data/db

MongoDB的数据存储目录不会自动创建,需要手动创建data目录,并设置合适的访问权限;

注意:MongoDB默认启动的数据库路径是“/data/db”,也必须手动创建,否则mongodb会报错;

3.2.4- 运行MongoDB服务

在命令行中执行mongo安装路径bin目录下的mongod命令来启动mongdb服务;

  • 参数“--dbpath”:指定数据库目录,数据库目录默认为“/data/db”;

  • 参数“--auth”:启用认证(MongoDB 默认安装完成后,只允许本地连接,同时不需要使用任何账号密码就可以直接连接);

    [root@localhost ~]# /usr/local/mongodb/bin/mongod --dbpath=/home/Anliven/data/db --auth 2018-11-20T09:57:23.501+0800 I CONTROL [main] Automatically disabling TLS 1.0, to force-enable TLS 1.0 specify --sslDisabledProtocols 'none' 2018-11-20T09:57:23.508+0800 I CONTROL [initandlisten] MongoDB starting : pid=18449 port=27017 dbpath=/home/Anliven/data/db 64-bit host=localhost.localdomain 2018-11-20T09:57:23.508+0800 I CONTROL [initandlisten] db version v4.0.4 2018-11-20T09:57:23.508+0800 I CONTROL [initandlisten] git version: f288a3bdf201007f3693c58e140056adf8b04839 2018-11-20T09:57:23.508+0800 I CONTROL [initandlisten] OpenSSL version: OpenSSL 1.0.1e-fips 11 Feb 2013 2018-11-20T09:57:23.508+0800 I CONTROL [initandlisten] allocator: tcmalloc 2018-11-20T09:57:23.508+0800 I CONTROL [initandlisten] modules: none 2018-11-20T09:57:23.508+0800 I CONTROL [initandlisten] build environment: 2018-11-20T09:57:23.508+0800 I CONTROL [initandlisten] distmod: rhel70 2018-11-20T09:57:23.508+0800 I CONTROL [initandlisten] distarch: x86_64 2018-11-20T09:57:23.508+0800 I CONTROL [initandlisten] target_arch: x86_64 2018-11-20T09:57:23.508+0800 I CONTROL [initandlisten] options: { security: { authorization: "enabled" }, storage: { dbPath: "/home/Anliven/data/db" } } ...... ...... ......

从命令的日志,可以看到详细的启动信息,例如:

  • “MongoDB starting : pid=3491 port=27017 dbpath=/home/Anliven/data/db 64-bit host=localhost.localdomain”
  • options: { security: { authorization: "enabled" }, storage: { dbPath: "/home/Anliven/data/db" } }

3.2.5- 禁用SELinux

通过在/etc/selinux/config中将 SELINUX 设置为 disabled 来禁用SELinux。SELINUX=disabled

以学习为目的,建议使用此项设置,但是必须重新启动系统才能使更改生效

4- MongoDB后台管理Shell

MongoDB Shell是MongoDB自带的交互式Javascript shell,用来对MongoDB进行操作和管理的交互式环境;

4.1- 进入MongoDB Shell

执行MongoDB安装路径下bin目录中的mongo命令文件就进入MongoDB后台管理;

[Anliven@localhost ~]$ cd /usr/local/mongodb/bin/
[Anliven@localhost bin]$ ll
total 253744
-rwxr-xr-x. 1 root root 12393712 Nov  7 03:48 bsondump
-rwxr-xr-x. 1 root root     5792 Nov  7 04:06 install_compass
-rwxr-xr-x. 1 root root 39753304 Nov  7 04:06 mongo
-rwxr-xr-x. 1 root root 62170704 Nov  7 04:06 mongod
-rwxr-xr-x. 1 root root 14702992 Nov  7 03:49 mongodump
-rwxr-xr-x. 1 root root 12733096 Nov  7 03:48 mongoexport
-rwxr-xr-x. 1 root root 12634648 Nov  7 03:48 mongofiles
-rwxr-xr-x. 1 root root 12892232 Nov  7 03:49 mongoimport
-rwxr-xr-x. 1 root root 15800824 Nov  7 03:49 mongoreplay
-rwxr-xr-x. 1 root root 15821528 Nov  7 03:49 mongorestore
-rwxr-xr-x. 1 root root 35363672 Nov  7 04:06 mongos
-rwxr-xr-x. 1 root root 12947464 Nov  7 03:48 mongostat
-rwxr-xr-x. 1 root root 12589240 Nov  7 03:49 mongotop
[Anliven@localhost bin]$ ./mongo
MongoDB shell version v4.0.4
connecting to: mongodb://127.0.0.1:27017
Implicit session: session { "id" : UUID("562febfc-d408-4f7c-b3a7-a230c64c2c38") }
MongoDB server version: 4.0.4
Welcome to the MongoDB shell.
For interactive help, type "help".
For more comprehensive documentation, see
    http://docs.mongodb.org/
Questions? Try the support group
    http://groups.google.com/group/mongodb-user
Server has startup warnings: 
2018-11-19T15:52:35.148+0800 I CONTROL  [initandlisten] 
2018-11-19T15:52:35.148+0800 I CONTROL  [initandlisten] ** WARNING: Access control is not enabled for the database.
2018-11-19T15:52:35.148+0800 I CONTROL  [initandlisten] **          Read and write access to data and configuration is unrestricted.
2018-11-19T15:52:35.148+0800 I CONTROL  [initandlisten] ** WARNING: You are running this process as the root user, which is not recommended.
2018-11-19T15:52:35.148+0800 I CONTROL  [initandlisten] 
2018-11-19T15:52:35.148+0800 I CONTROL  [initandlisten] ** WARNING: This server is bound to localhost.
2018-11-19T15:52:35.148+0800 I CONTROL  [initandlisten] **          Remote systems will be unable to connect to this server. 
2018-11-19T15:52:35.148+0800 I CONTROL  [initandlisten] **          Start the server with --bind_ip <address> to specify which IP 
2018-11-19T15:52:35.148+0800 I CONTROL  [initandlisten] **          addresses it should serve responses from, or with --bind_ip_all to
2018-11-19T15:52:35.148+0800 I CONTROL  [initandlisten] **          bind to all interfaces. If this behavior is desired, start the
2018-11-19T15:52:35.148+0800 I CONTROL  [initandlisten] **          server with --bind_ip 127.0.0.1 to disable this warning.
2018-11-19T15:52:35.148+0800 I CONTROL  [initandlisten] 
2018-11-19T15:52:35.149+0800 I CONTROL  [initandlisten] 
2018-11-19T15:52:35.149+0800 I CONTROL  [initandlisten] ** WARNING: /sys/kernel/mm/transparent_hugepage/enabled is 'always'.
2018-11-19T15:52:35.149+0800 I CONTROL  [initandlisten] **        We suggest setting it to 'never'
2018-11-19T15:52:35.149+0800 I CONTROL  [initandlisten] 
2018-11-19T15:52:35.149+0800 I CONTROL  [initandlisten] ** WARNING: /sys/kernel/mm/transparent_hugepage/defrag is 'always'.
2018-11-19T15:52:35.149+0800 I CONTROL  [initandlisten] **        We suggest setting it to 'never'
2018-11-19T15:52:35.149+0800 I CONTROL  [initandlisten] 
---
Enable MongoDB's free cloud-based monitoring service, which will then receive and display
metrics about your deployment (disk utilization, CPU, operation statistics, etc).

The monitoring data will be available on a MongoDB website with a unique URL accessible to you
and anyone you share the URL with. MongoDB may use this information to make product
improvements and to suggest MongoDB products and deployment options to you.

To enable free monitoring, run the following command: db.enableFreeMonitoring()
To permanently disable this reminder, run the following command: db.disableFreeMonitoring()
---

>

进入MongoDB Shell,默认会选择 test 文档(一个空数据库),以后进入时会选择用户指定的数据库;

  • db:查看当前选择的数据库;
  • show dbs:查看非空的数据库列表;
  • use :切换选择数据库,如果数据库存在则切换,如果不存在则直接创建;
  • exit 或者 quit() :退出MongoDB Shell;

4.2- 获取命令帮助信息

help:显示命令帮助信息;

> help
    db.help()                    help on db methods
    db.mycoll.help()             help on collection methods
    sh.help()                    sharding helpers
    rs.help()                    replica set helpers
    help admin                   administrative help
    help connect                 connecting to a db help
    help keys                    key shortcuts
    help misc                    misc things to know
    help mr                      mapreduce

    show dbs                     show database names
    show collections             show collections in current database
    show users                   show users in current database
    show profile                 show most recent system.profile entries with time >= 1ms
    show logs                    show the accessible logger names
    show log [name]              prints out the last segment of log in memory, 'global' is default
    use <db_name>                set current database
    db.foo.find()                list objects in collection foo
    db.foo.find( { a : 1 } )     list objects in foo where a == 1
    it                           result of the last line evaluated; use to further iterate
    DBQuery.shellBatchSize = x   set default number of items to display on shell
    exit                         quit the mongo shell
>

db.help():显示db常用命令帮助;

> db.help()
DB methods:
    db.adminCommand(nameOrDocument) - switches to 'admin' db, and runs command [just calls db.runCommand(...)]
    db.aggregate([pipeline], {options}) - performs a collectionless aggregation on this database; returns a cursor
    db.auth(username, password)
    db.cloneDatabase(fromhost) - deprecated
    db.commandHelp(name) returns the help for the command
    db.copyDatabase(fromdb, todb, fromhost) - deprecated
    db.createCollection(name, {size: ..., capped: ..., max: ...})
    db.createView(name, viewOn, [{$operator: {...}}, ...], {viewOptions})
    db.createUser(userDocument)
    db.currentOp() displays currently executing operations in the db
    db.dropDatabase()
    db.eval() - deprecated
    db.fsyncLock() flush data to disk and lock server for backups
    db.fsyncUnlock() unlocks server following a db.fsyncLock()
    db.getCollection(cname) same as db['cname'] or db.cname
    db.getCollectionInfos([filter]) - returns a list that contains the names and options of the db's collections
    db.getCollectionNames()
    db.getLastError() - just returns the err msg string
    db.getLastErrorObj() - return full status object
    db.getLogComponents()
    db.getMongo() get the server connection object
    db.getMongo().setSlaveOk() allow queries on a replication slave server
    db.getName()
    db.getPrevError()
    db.getProfilingLevel() - deprecated
    db.getProfilingStatus() - returns if profiling is on and slow threshold
    db.getReplicationInfo()
    db.getSiblingDB(name) get the db at the same server as this one
    db.getWriteConcern() - returns the write concern used for any operations on this db, inherited from server object if set
    db.hostInfo() get details about the server's host
    db.isMaster() check replica primary status
    db.killOp(opid) kills the current operation in the db
    db.listCommands() lists all the db commands
    db.loadServerScripts() loads all the scripts in db.system.js
    db.logout()
    db.printCollectionStats()
    db.printReplicationInfo()
    db.printShardingStatus()
    db.printSlaveReplicationInfo()
    db.dropUser(username)
    db.repairDatabase()
    db.resetError()
    db.runCommand(cmdObj) run a database command.  if cmdObj is a string, turns it into {cmdObj: 1}
    db.serverStatus()
    db.setLogLevel(level,<component>)
    db.setProfilingLevel(level,slowms) 0=off 1=slow 2=all
    db.setWriteConcern(<write concern doc>) - sets the write concern for writes to the db
    db.unsetWriteConcern(<write concern doc>) - unsets the write concern for writes to the db
    db.setVerboseShell(flag) display extra information in shell output
    db.shutdownServer()
    db.stats()
    db.version() current version of the server
>

一些示例:

> db
test
> 
> show dbs
admin   0.000GB
config  0.000GB
local   0.000GB
> 
> use local
switched to db local
> 
> db
local
> 
> exit
bye
[Anliven@localhost bin]$

在此界面不仅可以插入一些简单的数据、对插入的数据进行检索,还可以进行简单数学运算;

> 111 + 222
333
> 666 / 111
6
>

5- PyMongo

PyMongo is a Python distribution containing tools for working with MongoDB, and is the recommended way to work with MongoDB from Python.

PyMongo 3.7.2 Documentation: https://api.mongodb.com/python/current/

6- 参考信息

点赞
收藏
评论区
推荐文章
blmius blmius
3年前
MySQL:[Err] 1292 - Incorrect datetime value: ‘0000-00-00 00:00:00‘ for column ‘CREATE_TIME‘ at row 1
文章目录问题用navicat导入数据时,报错:原因这是因为当前的MySQL不支持datetime为0的情况。解决修改sql\mode:sql\mode:SQLMode定义了MySQL应支持的SQL语法、数据校验等,这样可以更容易地在不同的环境中使用MySQL。全局s
皕杰报表之UUID
​在我们用皕杰报表工具设计填报报表时,如何在新增行里自动增加id呢?能新增整数排序id吗?目前可以在新增行里自动增加id,但只能用uuid函数增加UUID编码,不能新增整数排序id。uuid函数说明:获取一个UUID,可以在填报表中用来创建数据ID语法:uuid()或uuid(sep)参数说明:sep布尔值,生成的uuid中是否包含分隔符'',缺省为
待兔 待兔
4个月前
手写Java HashMap源码
HashMap的使用教程HashMap的使用教程HashMap的使用教程HashMap的使用教程HashMap的使用教程22
Jacquelyn38 Jacquelyn38
3年前
2020年前端实用代码段,为你的工作保驾护航
有空的时候,自己总结了几个代码段,在开发中也经常使用,谢谢。1、使用解构获取json数据let jsonData  id: 1,status: "OK",data: 'a', 'b';let  id, status, data: number   jsonData;console.log(id, status, number )
Stella981 Stella981
3年前
Python3:sqlalchemy对mysql数据库操作,非sql语句
Python3:sqlalchemy对mysql数据库操作,非sql语句python3authorlizmdatetime2018020110:00:00coding:utf8'''
Wesley13 Wesley13
3年前
mysql设置时区
mysql设置时区mysql\_query("SETtime\_zone'8:00'")ordie('时区设置失败,请联系管理员!');中国在东8区所以加8方法二:selectcount(user\_id)asdevice,CONVERT\_TZ(FROM\_UNIXTIME(reg\_time),'08:00','0
Wesley13 Wesley13
3年前
00:Java简单了解
浅谈Java之概述Java是SUN(StanfordUniversityNetwork),斯坦福大学网络公司)1995年推出的一门高级编程语言。Java是一种面向Internet的编程语言。随着Java技术在web方面的不断成熟,已经成为Web应用程序的首选开发语言。Java是简单易学,完全面向对象,安全可靠,与平台无关的编程语言。
Stella981 Stella981
3年前
Django中Admin中的一些参数配置
设置在列表中显示的字段,id为django模型默认的主键list_display('id','name','sex','profession','email','qq','phone','status','create_time')设置在列表可编辑字段list_editable
Wesley13 Wesley13
3年前
MySQL部分从库上面因为大量的临时表tmp_table造成慢查询
背景描述Time:20190124T00:08:14.70572408:00User@Host:@Id:Schema:sentrymetaLast_errno:0Killed:0Query_time:0.315758Lock_
Python进阶者 Python进阶者
10个月前
Excel中这日期老是出来00:00:00,怎么用Pandas把这个去除
大家好,我是皮皮。一、前言前几天在Python白银交流群【上海新年人】问了一个Pandas数据筛选的问题。问题如下:这日期老是出来00:00:00,怎么把这个去除。二、实现过程后来【论草莓如何成为冻干莓】给了一个思路和代码如下:pd.toexcel之前把这