RK3288 Android5.1
现象:USB 接口触摸屏插到板子上,触摸屏无法使用,有可能出现更奇葩的,同一套代码,有的板子可以用,有的板子不能用。
1、打开串口调试,插上触摸屏,读取触摸屏的 PID(idVendor) 和 VID(idProduct)。
[ 37.456833] usb 3-1.1.1: new full-speed USB device number 4 using usb20_host
[ 37.558583] usb 3-1.1.1: New USB device found, idVendor=1ff7, idProduct=0013
[ 37.558785] usb 3-1.1.1: New USB device strings: Mfr=1, Product=0, SerialNumber=0
[ 37.558915] usb 3-1.1.1: Manufacturer: CVTouch
[ 37.588785] input: CVTouch as /devices/ff540000.usb/usb3/3-1/3-1.1/3-1.1.1/3-1.1.1:1.0/input/input4
[ 37.593900] hid-multitouch 0003:1FF7:0013.0001: input,hiddev0,hidraw0: USB HID v1.11 Pointer [CVTouch] on usb-ff540000.usb-1.1.1/input0
2、在 hid-ids.h 文件中定义此触摸屏的 PID 和 VID。
diff --git a/kernel/drivers/hid/hid-ids.h b/kernel/drivers/hid/hid-ids.h
index 45c593d..fe49ad2 100755
--- a/kernel/drivers/hid/hid-ids.h
+++ b/kernel/drivers/hid/hid-ids.h
@@ -235,9 +235,6 @@
#define USB_VENDOR_ID_CREATIVELABS 0x041e
#define USB_DEVICE_ID_PRODIKEYS_PCMIDI 0x2801
+
+#define USB_VENDOR_ID_CVTOUCH 0x1ff7
+#define USB_DEVICE_ID_CVTOUCH_SCREEN 0x0013
#define USB_VENDOR_ID_CYGNAL 0x10c4
#define USB_DEVICE_ID_CYGNAL_RADIO_SI470X 0x818a
3、将定义的 PID 和 VID 添加到 HID 特殊设备数组中。
diff --git a/kernel/drivers/hid/hid-core.c b/kernel/drivers/hid/hid-core.c
index 2bd798a..250fc52 100755
--- a/kernel/drivers/hid/hid-core.c
+++ b/kernel/drivers/hid/hid-core.c
@@ -2223,6 +2223,7 @@ static const struct hid_device_id hid_ignore_list[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_8_8_4_IF_KIT) },
{ HID_USB_DEVICE(USB_VENDOR_ID_YEALINK, USB_DEVICE_ID_YEALINK_P1K_P4K_B2K) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_CVTOUCH, USB_DEVICE_ID_CVTOUCH_SCREEN) },
{ }
};
4、在多点触摸模块的 mt_devices 数组中加入 id,即可支持此触摸屏
diff --git a/kernel/drivers/hid/hid-multitouch.c b/kernel/drivers/hid/hid-multitouch.c
old mode 100755
new mode 100644
index fb9ac12..52ef0ba
--- a/kernel/drivers/hid/hid-multitouch.c
+++ b/kernel/drivers/hid/hid-multitouch.c
@@ -1414,6 +1414,11 @@ static const struct hid_device_id mt_devices[] = {
MT_USB_DEVICE(USB_VENDOR_ID_ZYTRONIC,
USB_DEVICE_ID_ZYTRONIC_ZXY100) },
+ /* TOUCH panels */
+ { .driver_data = MT_CLS_DEFAULT,
+ MT_USB_DEVICE(USB_VENDOR_ID_CVTOUCH,
+ USB_DEVICE_ID_CVTOUCH_SCREEN) },
+
/* Generic MT device */
{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_MULTITOUCH, HID_ANY_ID, HID_ANY_ID) },
{ }